Other posts about EVPN/VXLAN in Proxmox VE: Let’s continue inspecting ARP and ND suppression features when using EVPN in Proxmox Virtual Environment (PVE). Initial setup I still have the EVPN1 VNet (VNI = 5001) configured in the PVE cluster (from the previous post), with no IP subnet configured for the VNet. VM1 is on the […]
Other posts about EVPN/VXLAN in Proxmox VE: In the earlier post Configuring VXLAN in Proxmox VE I showed L2 VXLAN data plane implementation on a Proxmox Virtual Environment (PVE) cluster. There was no special control plane for MAC learning so the PVE nodes learned the locations of MAC addresses just on the go, flooding the […]
On a HPE Aruba Networking 6300M switch someone had changed the outbound BGP policy, but apparently the platform did not trigger outbound BGP updates automatically in that case, so I was looking for a soft outbound reset functionality. Tested with AOS-CX version FL.10.13.1090: myarubaswitch# clear bgp vrf MY_VRF ipv4 unicast 10.10.10.10 soft outInvalid input: outmyarubaswitch# […]
My colleagues were faced with an IPv6 implementation case where the router IOS feature set prevented them from configuring the BGP sessions. I labbed something for them and thought this overall IPv6 BGP session configuration would be worth of documenting here because there are some differences when compared to the usual IPv4-only BGP configurations. I […]