The Cisco NX-OS releases for different platforms are identified interestingly. Let’s start with the mother of all NX-OS releases: x.y(z) = for Nexus 7000 Here x is the major release or software train, y is the minor release and z is the maintenance release. An example of the version number is 5.2(5). See Cisco NX-OS […]
Tag: nexus 5000
As you should know (simplified rule): Whenever the vPC peer link goes down the vPC secondary switch brings down all its connected vPC ports, assuming those vPCs are up in the vPC primary switch. This means that if you have non-vPC-connected hosts on your vPC secondary switch then those ports are left up and traffic […]
So it was a usual day in the wonderful world of networking and projects. Then I was suddenly lost in the Private VLANs. You know, the feature that has existed a long time in Cisco switches but still there are some known and unknown limitations in using it. Let’s talk about PVLANs. First the basics […]
In an earlier post (Dual-Homed FEXes and Switch Profiles) I wrote about the switch profiles and how to use them to configure dual-homed FEXes. I mentioned that it is possible to import existing configurations into the switch profiles. Now I was really attempting it in practice. When importing configurations I constantly struck myself to the […]
If you are going to use Twinax cables with your Nexus 5000 series switches or Nexus 2000 series FEXes you can check the certification matrix here: http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps10110/data_sheet_c78-568589_ps9670_Products_Data_Sheet.html As a bonus sector, data sheet for the 10G SFP+ modules is found in http://www.cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html.
I kind of understand the pain that each network admin has when changing the platform, especially if you haven’t had enough time to get experience on the new system prior to production. This article is meant to help the Cisco Catalyst admins to get some hold of Nexus 5000 series switch. Don’t expect this to […]
Using dual-homed FEXes with Cisco Nexus 5000 switches presents some new issues for the network admins. One important feature is that the FEX port configuration needs to exist on the both N5ks. Let’s see the topology example where the FEX is connected to the switches with vPC (= dual-homed FEX): The server is connected to […]
Cisco has this week released NX-OS 5.1(3)N1(1) for Nexus 5000 Series switches. See the release notes for more information, and there really is lots of information: http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/release/notes/Rel_5_1_3_N1_1/Nexus5000_Release_Notes_5_1_3_N1.html Note: The Dual-layer vPC I talked about is called Enhanced vPC (EvPC) in the release notes.
Today, in the highlight: FEX pre-provisioning. What is a FEX? It is Fabric Extender, a “remote line card” used in Cisco Nexus series switches. It is managed through its parent switch (like Nexus 5000 or Nexus 7000) but looks externally like a traditional data center access switch. In some cases you would like to configure […]
Doing some googling for the coming NX-OS 5.1(3)N1(1) for Nexus 5000 I found this: Cisco NX-OS Software Release 5.1(3)N1(1) for Cisco Nexus 5000 Series Switches and 2000 Series Fabric Extenders: https://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/product_bulletin_c25-686744.pdf Update: The same document in HTML: http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/product_bulletin_c25-686744.html Yes there are the goodies like FabricPath and Adapter FEX and PTP, but who cares about those […]